Septic Service
Septic Line Jetting in Bozeman, MT
High-pressure water jetting that clears clogged lines and buildup from your septic plumbing.
Overview
What makes our septic line jetting different
Jetting is the tool we reach for when a line is clogged but the tank itself is fine. Instead of digging up a pipe to find the blockage, we run high-pressure water through the line to cut through grease, sludge, roots, and the thick buildup that narrows pipes over years. It's the fastest way to get flow moving again without tearing up your yard.
The lines that cause the most trouble are the ones people can't see — the sewer line from the house to the tank, and the effluent lines from the tank out to the drain field. Grease and solids settle and coat the inside of these pipes, and over time the opening shrinks until drains slow or stop. Jetting scours the inside of the pipe walls clean so the system flows the way it was designed to.
We use jetting both as a repair and as preventative maintenance. If you've had a backup caused by a narrowed line, jetting clears it. If your system is older and you want to stay ahead of a problem, a scheduled jetting keeps the lines open between pump-outs. It's especially useful for systems with long pipe runs or properties where the drain field sits a good distance from the tank.
After we jet a line, we check flow end to end so you can see the difference, not just take our word for it. If jetting turns up a collapsed pipe or a broken joint, we'll tell you — that's a repair, not a jetting issue, and we'll lay out the options.
What's Included
What you get on this visit
- High-pressure jetting of clogged sewer lines
- Clearing buildup between house and tank
- Lateral and effluent line cleaning
- Drain-field distribution line clearing
- Done without digging up your yard
- Before-and-after flow check
How It Works
Our process
- 1
Find the problem line
We identify which run is slow or blocked — house to tank, or tank to field.
- 2
Access the line
We use the cleanout or tank access to reach the pipe without digging.
- 3
Jet it clear
High-pressure water cuts through grease, sludge, and roots to scour the pipe walls.
- 4
Check the flow
We run water through end to end so you can see it moving freely before we pack up.
FAQ
Septic Line Jetting questions, answered
- What's the difference between jetting and pumping?
- Pumping empties the tank. Jetting cleans the pipes — the sewer line to the tank and the effluent lines to the drain field. A lot of slow-drain problems are a clogged line, not a full tank.
- Will jetting fix a slow drain?
- Usually, if the cause is buildup in the line. We jet the line and then check flow. If the drain is still slow, the problem is elsewhere and we'll tell you what we find.
- Do you have to dig up my yard to jet a line?
- No. We jet through the cleanout or tank access, so there's no excavation. If we find a collapsed pipe, that's a separate repair — but jetting itself is trenchless.
- How often should septic lines be jetted?
- There's no fixed schedule. We jet on demand for slow drains or as preventative maintenance on older systems with long pipe runs. If your drains are moving fine, you probably don't need it.
- Can jetting damage my pipes?
- Jetting is safe for sound pipes. If a pipe is cracked, collapsed, or root-invaded, jetting won't fix that — we'll identify it and talk through the repair.
More Services